Install Tool; Install Process - Q-See QSNDVR16M User Manual

2.2.2 Install tool

One Phillips screwdriver

2.2.3 Install process

Open the DVR using screwdriver
Set one HDD as master and the other as slave if two HDDs are connected to one ATA interface!!!
:
Attention Hard Drives connected to the same parallel cable can not be set as master+master or
slave+slave, they must be master+slave!!!
HDD setup: Using a Maxtor Hard Drive (DiamondMax Plus 8 ATA/133 40GB) as example.
Read the jumper diagram on the rear of HDD
No jumper=DS(SLAVE)
Page 8