Q-See QSNDVR16M User Manual page 25

Page 27
22 Pan/Tilt control
23
24 Log file button
25
26
27
28
If the Remote control does not work, please check out the following:
Audio switch
Picture in picture: select the channel to display as small picture first, and
then press PIP button to enter PIP mode, the background picture is the
next channel. For example, If the user selects channel 10 first, and then
press PIP button, the screen will display as the Fig2.1.1 PIP showing. If
the display mode is PIP now, press the number button to select the small
picture.
Spot button: This button enables or disables the video output to call
monitor (spot monitor) in sequence.
POP: press this button first, and then press number button to select the
channel of main picture. For example: press POP button first, and then
press 5, the screen will display as the Fig 2.1.2 POP showing.
Sequence button: press this button to make the DVR display channels in
turn.
Page 27