In The Garage; Wi-Fi Signal Indicator - Genie Aladdin Connect Quick Setup Manual

STEP 3

In the Garage:

These factors must be determined prior to mounting Aladdin Connect™
(DCM) to the wall or ceiling.
1. Optimal Wi-Fi signal strength.
• If an optimal signal cannot be located within the garage, move the wireless router closer to
the garage or install a Wi-Fi range extender (available from most electronic stores)
2. Desired DCM location.
3. Access to 110VAC outlet within 5 feet.
1. Plug Power Pack into wall outlet and DCM near the chosen mounting
location.
The WI-FI signal indicator LED should illuminate signaling that the Wi-Fi
signal is still in tact.
• A GREEN LED indicates a good Wi-Fi signal.
YELLOW
• A LED, indicates a weak signal. Move Aladdin
Connect™ to a position that better suits the Wi-Fi
signal from the router.
RED
• A LED, indicates a lost or faulty signal. Move
Aladdin Connect™ to a position that better suits the
Wi-Fi signal from the router. Contact Customer Service
for further assistance. (1-800-599-4995)
2. Once an optimal signal and location is obtained,
UNPLUG POWER PACK from the DCM and continue to
STEP 4.
WARNING
UNPLUG GARAGE DOOR OPENER PRIOR TO INSTALLING
ALADDIN CONNECT™
Door may operate unexpectedly.
AVERTISSEMENT
DÉBRANCHER L'OUVRE-PORTE DE GARAGE AVANT
D'INSTALLER ALADDIN CONNECT™
La porte peut fonctionner de façon inattendue.

Wi-Fi Signal Indicator

GOOD -- WEAK -- POOR
DPS Signal
Red/Blue LEDs