The Printer Does Not Work - Acer 3500 User Manual

24
No audio is heard from the computer.
Check the following:
The volume may be muted. In Windows, look at the volume control
•
(speaker) icon on the taskbar. If it is crossed-out, click on the icon and
deselect the Mute option.
The volume level may be too low. In Windows, look at the volume control
•
icon on the taskbar. You can also use the volume control buttons to adjust
the volume. See "Hotkeys" on page 15 for more detail.
If headphones, earphones or external speakers are connected to the line-
•
out port on the computer, the internal speakers automatically turn off.
I want to eject the optical drive tray without turning on the
power. I cannot eject the optical drive tray.
There is a mechanical eject hole on the optical drive. Simply insert the tip of a
pen or paperclip and push to eject the tray.
The keyboard does not respond.
Try attaching an external keyboard to a USB 2.0 port on the computer. If it
works, contact your dealer or an authorized service center as the internal
keyboard cable may be loose.

The printer does not work.

Check the following:
Make sure that the printer is connected to a power outlet and that it is
•
turned on.
Make sure that the printer cable is connected securely to the computer's
•
parallel port or a USB port and the corresponding port on the printer.
I want to set up my location to use the internal modem.
To properly use your communication software (e.g. HyperTerminal), you need
to set up your location:
1 Click on Start, Settings, Control Panel.
2 Double-click on Modems.
3 Click on Dialing Properties and begin setting up your location.
Refer to the Windows manual.