Launch Manager - Acer 3500 User Manual

22
Before performing a restore operation, please check the BIOS settings.
1 Check to see if Acer disk-to-disk recovery is enabled or not.
2 Make sure the [D2D Recovery] setting in [Main] is [Enabled].
3 Exit the BIOS setup utility and save changes. The system will
reboot.
Note: To activate BIOS setup utility, press <F2> during POST.
1 Restart the system.
2 While the Acer logo is showing, press <Alt>+<F10> at the same
time to enter the recovery process.
3 Refer to screen instructions to perform system recovery.
Important: This feature occupies 2 - 3 GB in a hidden partition on
your hard drive.

Launch Manager

Launch Manager allows you to set the four launch keys located above the
keyboard. "Launch keys" on page 10 for the location of the
launch keys.
You can access the Launch Manager by clicking on Start, All Programs, and then
Launch Manager to start the application.