Supported Commands; Table 5-1 Supported Commands - Maxtor Computer Drive Product Manual

5.5.2

Supported Commands

The DiamondMax 8S 40GB Serial ATA hard disk drives support all the mandatory
commands from the general feature set for devices not supporting the Packet
command feature set. Refer to the ATA/ATAPI-7, volume 1 standard for a detailed
description of these commands. The IDENTIFY DRIVE command, however, is
elaborated in Identify Drive Command Parameters, table 5-2.
Table 5-1 lists the supported commands.
CHECK POWER MODE
DEVICE CONFIGURATION FREEZE LOCK
DEVICE CONFIGURATION IDENTIFY
DEVICE CONFIGURATION RESTORE
DEVICE CONFIGURATION SET
DOWNLOAD MICROCODE
EXECUTE DRIVE DIAGNOSTIC
FLUSH CACHE
FLUSH CASHE EXT
IDENTIFY DEVICE
IDLE
IDLE IMMEDIATE
INITIALIZE DEVICE PARAMETERS
NOP
READ BUFFER
READ DMA
READ LONG
READ LONG EXT
READ MULTIPLE
Table 5-1
Supported Commands
Command
ATA Bus Interface and ATA Commands
Command
Code
98h, E5h
B1h
B1h
B1h
B1h
92h
90h
E7h
EAh
ECh
97h, E3h
95h, E1h
91h
00h
E4h
C8h, C9h
22h, 23h
2Fh
C4h
Maxtor DiamondMax 8S 40GB SATA
Feature
Register
Value(s)
C1h
C2h
C0h
C3h
07h, 01h
5-2