Table of Contents
Advertisement
Electrical Connection (4-wire)
Bare Wire Connection
1
1
To make a bare wire connection, use holes on the left
side of the terminal block. To connect eyelet style
wires, use holes on right side of terminal.
5
1
Attach ground wire (green)
with ground screw that was removed.
7
1
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.
Eyelet Connection
18
(cont.)
4
Feed supply cord up through hole in bottom
of range back.
6
Attach line #1 (black) and line #2 (red)
leads to outside terminal. Attach neutral wire (white)
to center terminal on terminal block.
8
Reattach access door.
1
Advertisement
Table of Contents
