Basic Operation - AT&T ML17928 Quick Start Manual

Basic operation

By default, the telephone is set to use line 1 for making calls. When you
answer a call, the telephone automatically selects the ringing line.
Making, answering or ending a call
To make a call with the speakerphone:
1. Press SPEAKER
-OR-
To override automatic line selection, press
SPEAKER
-OR-
If you choose SPEAKERPHONE in Choose the
preferred mode (see user's manual), press
LINE 1 or LINE 2 directly to activate the
speakerphone.
2. Wait for a dial tone, then dial the telephone
number. The screen displays the elapsed time
as you talk (in hours, minutes and seconds).
3. Press SPEAKER
To make a call with the handset:
1. Lift the handset to use the primary line.
-OR-
Lift the handset, then press LINE 1 or LINE 2 to override automatic
line selection.
2. Wait for a dial tone, then dial the number.
3. Place the handset on the telephone base to hang up.
To make a call with the corded headset:
Make sure the corded headset is connected to the telephone base.
Press HEADSET on the telephone base to use the primary line.
1.
-OR-
Press HEADSET, then press LINE 1 or LINE 2 to override automatic
line selection.
-OR-
If you chose HEADSET in Choose the preferred mode (see user's manual),
press LINE 1 or LINE 2 directly to activate the headset.
2. Wait for a dial tone, then dial the number.
Press HEADSET to hang up.
3.
to use the primary line.
, then press LINE 1 or LINE 2.
to hang up.
7
8:00 AM 8:00 AM
8887227702 8887227702
L1 L1 0:00:08 0:00:08
Elapsed time Elapsed time
LINE buttons
1/11 1/11