Assembly - Bissell POWERGLIDE CORDLESS 1534 SERIES User Manual

Asse mbly
Your vacuum comes in five easy‑to‑assemble
components:
Handle and Hose
Extension Tube
Battery
Base Unit
Foot
+
Charging Base
1. Insert the handle into the extension wand and
click into place.
2. Pull back the handle release button and slide
the extension wand into the base unit.
3. Insert the hose end into the hose connector
on the back of the base unit, making sure both
tabs click into place.
4. The 2‑in‑1 accessory can be stored in the
clip on the side of the base unit.
5. Slide base unit onto foot connector until
you hear a click.
6. Push the battery into the housing until
you feel it lock into place. Replace the battery
housing cover.
1.
3.
5.
www.BISSELL.ca
2.
4.
6.
5