b. Make sure that
Media Check
default setting). If this option is set to On, the
printer may show Media Type Mismatch on the
LCD display during printing.
c. Set the
Tray Switch
d. Click OK.
3. Click OK.
is set to
Off
(the
option to Off.
Job Options Tab
1. On the
Job Options
default setting) for the Quality.
2. Select the appropriate
table on page 2.
Make sure to open the printer's face-up stacker
door when "Stacker (Face-up)" is selected.
3. Click OK.
7
tab, select
Fine / Detail
Output
Bin: refer to the Media
NOTE
(the