Configure Call Routes On Freepbx; Figure 5: Configure Register Sip Trunk On The Ucm6100 - Grandstream Networks UCM6100 Series Configuration

The other fields in the above figure are optional.

From Domain: Configure the FreePBX IP or domain address.

From User: Same as username, i.e., freepbxtrunk.

Configure Call Routes on FreePBX

1. On the FreePBX web GUI, go to outbound route setting page to create an outbound route for the SIP
Firmware Version 1.0.1.25

Figure 5: Configure Register SIP Trunk on the UCM6100

Configuring UCM6100 Series With FreePBX
Password is trunkpassword
as we created in FreePBX.
Page 7 of 10