How To Remove And Reinstall The Pullout Drawer - LG LFX28978 series Service Manual

3-19 HOW TO REMOVE AND REINSTALL THE PULLOUT DRAWER

3-19-1 Follow Steps to Remove
Step 1) Open the freezer door.
Step 3) Remove 2 screws one on each side of the guide
rails.
Step 5) First: Remove the gear from the left side first by releasing the tab behind the gear, place a screwdriver between the
gear and the tab and pull up on the gear.
Second: Remove the center rail.
Third: Remove the gear from the right side by following the same steps for the left side.
NOTE: THIS TAB MUST BE PUSHED IN TO RELEASE THE GEAR.
Step 2) Remove the lower basket.
Figure 48
Step 4) Removal of the freezer door is done by lifting clear
Figure 50
- 14 -
Figure 49
of the rail support. Fully extend both rails.
Figure 51
Figure 52