Configuring Extension Permission; Figure 1: Create An Extension On Ucm6100 - Grandstream Networks UCM6100 Configuring Permission

CONFIGURING EXTENSION PERMISSION

On the UCM6100 web GUI, create an extension under PBX->Basic/Call Routes->Extensions. Users
shall see "Permission" option with four levels in the drop down list.

Figure 1: Create an Extension on UCM6100

This "Permission" option restricts whether this extension could be used to make desired outgoing calls.
The extension needs to be assigned with higher level (or equal level) permission compared to the
outbound rule's privilege in order to make outbound calls with that rule.
Firmware Version 1.0.1.25 Configuring Permission/Privilege Level Settings on UCM6100 Page 4 of 7