Remote Control Code - Panasonic SC-HTB885 Operating Instructions Manual

One-Touch Connection
(Connecting by NFC)
For NFC-compatible Bluetooth
(Android devices) only
TM
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
the main unit, you can complete all preparations,
from registering a Bluetooth
establishing a connection.
Preparation
≥ Turn on the NFC feature of the device.
≥ Android device version lower than 4.1 requires
the installation of the app "Panasonic Music
Streaming" (free of charge).
1
Enter "Panasonic Music Streaming" in the search
box of Google Play
TM
"Panasonic Music Streaming".
2
Start the app "Panasonic Music Streaming" on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the app.
Press [ ] to select "BLUETOOTH".
Touch and hold your device on the
NFC touch area of the main unit [ ].
( 6)
Do not move the Bluetooth
displays a message or reacts in some way.
Once the Bluetooth device has reacted, move the
®
device away from the main unit.
≥When the registration and connection of the Bluetooth
device is complete, the name of the connected device is
indicated on the display for a few seconds.
≥The location of the NFC touch area differs depending on
the device. When a connection cannot be established
even if your Bluetooth
touch area of the main unit, change the position of the
device. The condition may also improve if you download
the dedicated app "Panasonic Music Streaming" and
start it up.
Start playback on the Bluetooth
device.
≥ If you touch another device to the main unit, you can
update the Bluetooth connection. The previously
®
connected device will be disconnected automatically.
≥ When the connection is established, playback may start
automatically depending on the type of device being used.
≥ The One-Touch Connection may not work properly
depending on the type of device being used.
20
RQT0A01
devices
®
device on
®
device to
®
to search, and then select
device until it beeps,
®
device has touched the NFC
®

Remote control code

When other Panasonic devices respond to this
system's remote control, change the remote
control code on this system and the remote
control.
Preparation
≥ Turn off all other Panasonic products.
≥ Turn on the main unit.
∫ To set the code to "REMOTE 2"
Press and hold [MUTE] and [OK] for more than
4 sec.
"REMOTE 2" is indicated on the display.
∫ To set the code to "REMOTE 1"
Press and hold [MUTE] and [4] for more than
4 sec.
"REMOTE 1" is indicated on the display.
®
®