Monitoring All Communication Events - Nokia 6630 User Manual

Icons:
– incoming,
– outgoing, and
– missed
communication events.
Tip! To view a list of
sent messages, press
and select Messaging
Sent.
Fig. 4 General log of
communication events.
24

Monitoring all communication events

To monitor all voice and video calls, text messages, or data connections registered by the
phone, press and select Log, and press
communication event, you can see the sender or recipient name, phone number, name of
the service provider, or access point. You can filter the general log to view just one type of
event and create new contact cards based on the log information.
Subevents, such as a text message sent in more than one part and packet data
connections, are logged as one communication event. Connections to your mailbox,
→
multimedia messaging centre, or Web pages are shown as packet data connections.
Note: When sending messages, your phone may display the word "Sent". This is
an indication that the message has been sent by your phone to the message
centre number programmed into your phone. This is not an indication that the
message has been received at the intended destination. For more details about
messaging services, check with your service provider.
• To filter the log, select
• To erase the contents of the log, Recent calls register, and Messaging delivery reports
permanently, select
• To set the Log duration, go to
remain in the phone memory for a set number of days after which they are
automatically erased to free memory. If you select
calls register, and Messaging delivery reports are permanently deleted.
Packet data counter and connection timer: To view how much data, measured in
kilobytes, has been transferred and how long a certain packet data connection has lasted,
scroll to an incoming or outgoing event indicated by Pack., and select
details.
Copyright © 2004 Nokia. All rights reserved.
to open the general log. See Fig. 4. For each
→ Filter. Scroll to a filter and press Select.
Options
→
Options Clear log. Press
→
Options Settings
Yes to confirm.
→
Log duration. The log events
No log, all the log contents, Recent
Options
→
View