Connecting The System To Power; Adding The System To Your Wi-Fi Network; Download And Install The Soundtouch™ App; Connect The System To Your Wi-Fi Network - Bose Wave SoundTouch Owner's Manual

Setting up the System

Connecting the system to power

Before you set up the system on your network, connect the system
to power.
1. Insert the small end of the AC power cord into the AC Power
connector.
2. Plug the power cord into an AC (mains) power outlet.
Adding the system to your Wi-Fi
After you connect the system to power, you must download
and install the SoundTouch
™
that is connected to your network. The app guides you through
connecting the system to your network.
Note: If you do not have a smartphone or tablet, you can use a
computer for setup. See page 25.
To add a system to an existing SoundTouch
If you have already set up SoundTouch
not need to download the SoundTouch
1.
On your smartphone or tablet, select the SoundTouch
to launch the app.
2. Select EXPLORE > SETTINGS > Systems > ADD SYSTEM to
add another system.
The app guides you through setup.
Download and install the SoundTouch™ app
If this is your first time setting up a SoundTouch
install the app. On your smartphone or tablet, download the
SoundTouch controller app.
™
Bose SoundTouch
• iOS users: download from the App Store
• Android users: download on the Google Play
™
• Amazon Kindle Fire users: download from Amazon App store for
Android
8 - English
network
®
app onto a smartphone or tablet
™
account
for another system, you do
™
app again.
™
system, you must
™
controller app
TM
store
™
Connect the system to your Wi-Fi
After you install the app, add the system to your network:
1. On your smartphone or tablet, select
The app guides you through connecting the system to your
Wi-Fi network.
2. Follow the instructions in the app to complete setup,
including creating a SoundTouch
library and music services.
Note: To use Bluetooth
setup. To connect your Bluetooth enabled devices,
see page 13.

Setting the clock

1. Press and hold either Time – or Time + for about one second.
Initially, HOLD TO SET appears on the display and then
quickly changes to – CLOCK SET – as the button is
depressed.
icon
™
2. Release the selected Time button.
3. Press Time – to adjust the displayed time backward or press
Time + to adjust the displayed time forward until it matches
the current time. You can also press and hold for rapid
adjustment.
4.
Wait five seconds for the system to exit the clock setup mode.
Notes:
• To change the clock display from 12-hour (AM/PM)
time to 24-hour time, see "The setup menu" on page 21.
• If the system loses power due to a power outage or if you unplug
the system, all system settings are permanently retained. How-
ever, the clock time is temporarily stored in backup memory for
up to 48 hours.
network
®
to launch the app.
account, adding a music
™
technology, you must complete
®