5. Tighten the fixing lever and secure the height adjustment lever. You can also adjust the angle of the
fixing lever, if necessary.
Note: Print quality may decline if you do not tighten the fixing lever.
6. Press the
7. Check to see if Platen Height Error is displayed on the LCD screen and do one of the following:
• If it is not displayed, repeat steps 1 through 6 and move the height adjustment lever one step to
the left to raise the platen. Continue to raise the platen until the error is displayed.
• If it is displayed on the LCD screen, repeat steps 1 through 6 and move the height adjustment
lever one step to the right to lower the platen.
Parent topic:
Adjusting the Angle of the Fixing Lever
You can adjust the fixing lever of the platen to any angle that is easy to use.
moveable base button to move the platen into the printer.
Loading the T-shirt
50