Optoma EP706 Service Manual page 7

No Item
Unit
13 dimension
(W X D X H)
LED
14
Indicator
15 Tilt angle
Power
16
supply
Power
17
consumption
Input
18
connections
Operational
19
noise
20 Temperature
Maximum
21
Humidity
22 Altitude
Confidential
230 x 210 x 95 mm
Power (Bi-color):
Orange: Standby (Projector off)
Green : Normal (Projector on)
Flash Green: Warm up (Go to Normal mode)
Flash Orange: Cooling down (Go to Standby mode)
Error Indication :
Lamp : Red
Temp : Red
6 degrees with elevator mechanism
(one push button and two adjust knobs for height adjust-
ment)
100V ~ 240V +/- 10% 50/60Hz
260W (Maximum)
Standby mode - < 12 Watt 110V AC
One D-Sub 15 pin connector for analog RGB/component
video/HDTV and supports SCART RGB signal (via an
adapter for Europe only)
One mini-Din 4 pin connector for S-Video
One composite RCA-type connector
One mini-Din 3 pin connector for RS232
Marketing specification : 30dB
Engineering specification: (TBD)
CORE: typical: 35dB
Operating: 5 - 35°C
Storage: -20- - 60°C
Operating: 5 - 35°C, 80% RH (Max.), non-condensing
Storage: -20- - 60°C, 80%RH (Max.), non-condensing
Operating: 0~2,500 ft, for 5°C~35°C
2,500~5,000 ft, for 5°C~30°C
5,000~10,000 ft, for 5°C~25°C
Maximum storage altitude 40,000 ft
Description
1-3
EP706/709