Disassemble - Optoma EP706 Service Manual

2-9 Disassemble Front Cover
No Procedure
 (1) Loose two screws to pull
out the front cover.
(as red circle)
(2) Unscrew two screws to
disassemble IR sensor
lens and IR sensor board.
Confidential
(1)
Note: To Disassemble the IR lens from front
cover,
you have to use a tool to push the tenon of the
IR sensor
Front cover
Note : The longer side of IR lens is near to the
top cover.The shorter side of IR lens is near
to the bottom cover.
2-2
Photo
(2)
IR lens
EP706/709
longer
shorter