Table of Contents
Advertisement
Stop switch
Use the stop switch to switch o the engine.
Start the engine and make sure the engine stops when
you move the stop switch to the stop setting.
Vibration damping system
Your machine is equipped with a vibration damping
system that is designed to minimize vibration and make
operation easier.
'
The machine
´s vibration damping system reduces the
transfer of vibration between the engine unit/hardvesting
equipment and the machine´s handle unit.
WARNING! Over exposure to vibration
!
can lead to circulatory damage or nerve
damage in people who have impaired
circulation. Contact your doctor if you
experience symptoms of overexposure
to vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength, changes
in skin colour or condition. These
symptoms normally appear in the
ngers, hands or wrists. The risk
increases at low temperatures.
8 – English
GENERAL SAFETY PRECAUTIONS
Muf er
The muf er is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user. A muf er
tted with a catalytic converter is also designed to reduce
harmful exhaust gases.
In countries that have a warm and dry climate there is a
signi cant risk of re. We therefore t certain muf ers with
a spark arrestor mesh. Check whether the muf er on your
machine is tted with this kind of mesh.
For muf ers it is very important that you follow the
instructions on checking, maintaining and servicing your
machine.
Never use a machine that has a faulty muf er.
Regularly check that the muf er is securely attached to
the machine.
If the muf er on your machine is tted with a spark
arrestor mesh this must be cleaned regularly. A blocked
mesh will cause the engine to overheat and may lead to
serious damage.
WARNING! Muf ers tted with catalytic
!
converters get very hot during use and
remain so for some time after stopping.
This also applies at idle speed. Contact
can result in burns to the skin.
Remember the risk of re!
Advertisement
Table of Contents
