Table of Contents
Advertisement
Introduce the 2º section of shaft with diameter 29 mm
in the union parts of the first section and tighten the
screws as showed
1
Turn the shaft
Tighten the screws of the union as showed in the
pcture
1
Verify the uniform adjustment of the unions and if
it is necessary tight the screws untill the adjustment
of the unions is uniform
–
10
English
STARTING UP
3
4
2
3
4
2
Place the lugs in the hook of the harneses, then
introduce the lug in the towing hook of the machine
as showed in the pictures, then screw the security
nuts oon the lugs.
Take the strips on the harnes and suit it according
the user, after that put the harnes in your left shoulder,
take the machine and rise it up, them prove the
adjustment and the confort of the harnes, if it's correct
unload the machine and proced to start the engine,
if it is not correct readjust the strips of the harnes
untill it suits the user
Advertisement
Table of Contents
