Optoma EP783 Service Manual page 78

3. Programming
- Key in the serial number into the
barcode blank space.
- In "Write Source Select," make a check
in "Analog"and "Digital".
- Click "Program."
4. Change the cable to Anlaog
- When the message "Please change the
cable to Analog" is shown on the screen,
click "OK" button.
5. Change the cable to Digital
- When the message "Please change the
cable to Digital" is shown on the screen.
6. When the EDID program is completed,
a message "OK" will appear on the screen.
EP783/EP783S/EP783L/OPX5000/TX783L/TX783S Confidential
6-4