Disassemble Keypad Module And Top Cover - Optoma EP783 Service Manual

3. Unplug 2 connectors (as yellow square).
4. Take off the FPC Cable.
Note: - Avoid damage by pulling and draging
IR cable and keypad FPC cable.
- Hold the CNNT plug when pulling the
FPC cable is strongly recommended.
Pulling the cable directly from the unit
will cause the cable damages.
- Make sure cables are plug into the
correct ports when assembling the unit.
2-5 Disassemble Keypad
Module and Top Cover
1. Tear off the Keypad Mylar.
2. Unscrew 2 screws (as red circle) to
disassemble the Keypad Module.
3. Separate the Keypad module from the
top cover.
Note: - Take care the six tenons (as yellow
square) when sepatate the Keypad
Module.
- Make sure cables plug into the correct
ports when assembling the unit.
EP783/EP783S/EP783L/OPX5000/TX783L/TX783S Confidential 2-