Yamaha XS250 Service Manual page 9

11. Rear Assembly
11-1 Remove the top cover. (See Procedure 1.)
11-2 Remove the six (6) screws marked [270]. The rear assembly
can then be removed. (Fig. 7)
12. SUB 5/5 Circuit Board
12-1 Remove the top cover. (See Procedure 1.)
12-2 Remove the rear assembly. (See Procedure 11.)
12-3 Remove the four (4) screws marked [440] and the two (2)
screws marked [50b] and the two (2) screws marked [60b].
The SUB 5/5 circuit board can then be removed. (Fig. 7)
5/5
[270]
[270]
[270]: Bonding Tapping Screw-B 4.0X8 MFZN2BL (VR779900)
Cover, Speaker terminal
Rear panel
[60b]
2/5
[70b] 2
[50a]: Bind Head Screw A4.0X8 MFZN2BL (VP156800)
[50b]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300)
[60b]: Bind Head Tapping Screw-B 3.0X12 MFZN2BL (VQ074600)
[70a]: Bind Head Screw SP 5.0X10 MFZN2BL (VU688100)
[70b]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[440]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
Rear assembly [270]
[270]
(Fig. 7)
2
[50b] 2
(Fig. 8)
[440] 2
[440] 2
[50a] 2
[50a] 4
XS250/350
9