Table of Contents
Advertisement
When using an extension cord, be careful not to exceed its
recommended amperage limit. Also, be sure that all items
plugged into the electrical outlet do not exceed a total of
15 amperes.
Except as specifically explained in this guide, do not attempt
to service this product yourself. Opening or removing covers
that are marked Do Not Remove may expose you to high
voltage or other risks. Refer all servicing in those
compartments to a qualified service representative.
Be sure to keep the consumable components out of the reach
of children.
Unplug this printer from the wall outlet and refer servicing
to a qualified service representative under the following
conditions:
A. When the power cord or plug is damaged or frayed.
B.
If liquid has been spilled into the printer.
C. If the printer does not operate normally when the
operating instructions are followed.
D. If the printer has been dropped or the chassis has been
damaged.
E.
If the printer exhibits a distinct change in performance,
indicating a need for service.
Note:
Adjust only those controls that are covered by the operating
instructions, as improper adjustment of other controls may result
in damage and may require repairs by a qualified service
representative.
Read Before Using the Printer
7
Advertisement
Table of Contents
