3Com PathBuilder S200 Series Manual page 19

Route Selection Table Parameters
Parameters
These Route Selection Table parameters should be configured:
Entry Number
Address
Destination #1
Voice Over IP
T0008-48/B
Note
A table boot is required for changes to these parameters to take affect.
Range 1 to 16
Default 1
Description Specifies the number used to reference this table record.
Range 0 to 15 digits
Default blank
Description Specifies the network address for calls routed beyond this node.
Range 0 to 32 alphanumeric characters. Use space to blank the field.
Default blank
Description Specifies the destination to which calls are routed. Enter SoTCP.
Configuring VoIP
15
Revision 5.2