3Com PathBuilder S200 Series Manual page 18

Configuring VoIP
14
Serial Connection Establishment Timeout
Range 1 to 200. Specified in 50 ms increments.
Default 100
Description Specifies the time SoTCP waits for connection establishment with
the serial device.
When a node receives a call request from a source node, the
SoTCP will send a Call Request packet to the serial protocol and
waits for a Call Accept packet. If the SoTCP protocol does not
receive a Call Accept packet within the timeout, it sends a Call
Clear packet to the source node.
Boot Type SoTCP Boot
TCP Connection Establishment or Clearing Timeout
Range 1 to 200. Specified in 50 ms increments.
Default 100
Description Specifies the time SoTCP waits for the connection establishment
or connection clearing with the peer SoTCP protocol.
Boot Type SoTCP Boot
TCP Keep Alive Timer
Range Enabled, Disabled
Default Enabled
Description Used to enable or disable the TCP Keep Alive Timer.
• Enabled: TCP protocol sends keep alive packets over the
network at a one minute interval. If the destination node does
not respond to the keep alive packets, source node clears TCP
sessions.
• Disabled: TCP protocol does not send keep alive packets over
the network.
Boot Type SoTCP Boot
Voice Over IP