GL-1020 Operator's Guide (Basic)
—prints the entire number of copies for each
Grouping copies
page printed. This option is also knows as "uncollated"
mode.
Note: This control is disabled if Stapling is enabled.
—prints all pages of a job and sorts them into
Sorting copies
the number of sets specified in the Number of Copies field.
Note: This control is disabled if Stapling is enabled.
Setting the Output Destination
The Destination is the copier tray that receives your job.
1
Click the
tab.
Setup
2
From the Destination drop-down list, choose the output tray
Printing in Standard Mode
Documents are usually printed using what the printer driver refers
to as standard layout, which means one page per piece of paper.
Other layout options are book format and multiple pages per
sheet.
To select standard printing mode:
1
Click the
Layout
2
Navigate to the Document Layout group box and then click
.
Standard
Printing Single-Sided Documents
To select single-sided printing:
1
On the Document properties window, click the
2
From the Duplex drop-down list, choose
If the Duplex options are grayed out (cannot be selected),
booklet printing may be enabled. Go to the
make sure Document Layout option is set to Standard.
Printing Double-Sided Documents
Double-sided printing, called duplex printing, allows you to print
documents on both sides of the paper with a choice of short or
long binding edge.
Duplex options are disabled when you select Book Format on the
tab, as duplex long edge printing options are implicit in
Layout
that mode.
tab.
tab.
Setup
.
None
tab and
Layout
95