Definitions: Safety Guidelines; Nail Specifications; Tool Specifications - DeWalt DCN660 Instruction Manual

FIG. 1
K F H
O
C
A. Trigger I. Bump/sequential
selector switch
B. Trigger lock-off
J. Reversible suspension
C. Depth adjustment wheel
hook
D. Headlights/Low
K. No-mar pad
battery/Stall indicator
L. No-mar pad storage
E. Jam clearing latch
M. Stall release lever
F. Contact trip
N. Battery
G. Magazine
O. Nail depth indicator
H. Pusher
E A B M
G

NAIL SPECIFICATIONS

Angled Nail 1-1/4" to 2-1/2"
Lengths (32 mm to 65 mm)
Shank Diameters
Nail Stick Angles

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result
in property damage.
Firing Mode
Voltage
L J N
Height
Width
Length
Weight (with battery)
16 gauge
Magazine Angle
20˚
Loading Capacity
1
No Lube
D I

TOOL SPECIFICATIONS

Selectable : Sequential or Bump
20
11.8" (300 mm)
3.6" (91 mm)
11.8" (300 mm)
6 lbs. (2.72 kg)
20˚
Up to 110 nails