Copy Density
The copy density can be changed by nine steps.
Menu Item
Copy Density
Notice and useful tips for copying
Note for copying
❏
When you make a copy using a control panel function, a moiré
(cross-hatch) pattern may appear on your printout. To eliminate the
moiré, change the reduce/enlarge ratio or shift the position of the
original document.
❏
The copied image may not have exactly the same size as the original.
❏
If this product runs out of paper while making copies, be sure to load
additional paper as soon as possible. If left without paper for a long
period of time, the colors of the first copy made after reloading may
not accurately reflect those of the original.
❏
If the LCD panel indicates low ink while you are copying, you can
either continue making copies until the ink runs out, or stop making
copies and then replace the ink cartridge.
1. Press the Menu button.
2. Select the Copy Density.
3. Adjust the copy density.
4. Press the OK button.
Setting
19
Copying