Vertex Standard VX-1700 Series Service Manual page 38

CE77 PC Programming Software
TX ID PARAMETER
This parameter programs the Selcall TX ID to be
called.
To program this parameter, enter the TX ID (4 dig-
its) into the "TX ID" column, then set the desired
effective channel range (i.e. 1-001, 1-050, 2-051, etc.)
for the TX ID into the "FROM" and "TO" columns.
Enter the Alpha/Numeric Tag (8 digits) of the TX ID
into the "TAG" column, if desired.
"TX ID" P
ARAMETERS
TELEPHONE NUMBER PARAMETERS
This parameter programs the telephone number for
the Telcall feature.
To enter the telephone number, double click the left
mouse button on the desired column, type in the tele-
phone number (up to 16 digits), then press the [EN-
TER] key to save the programmed number.
Select the Telcall type from the "Tel Call Type" Drop
Down list.
The available selections are B16 (BARRETT ® 16), C12
(CODAN ® 12), and C16 (CODAN ® 16).
Put a check mark into the check box to enable pro-
gramming of the Selcall Self ID from the transceiv-
er's set ("menu") mode.
"T N " P
ELEPHONE UMBER ARAMETERS
38