Table of Contents
Advertisement
38
USB Configuration
Scroll to this item and press <Enter> to view the following screen:
Main
Advanced
USB Configuration
All USB Devices
Onchip USB 3.0 Controller
Legacy USB Support
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
Onchip USB3.0 Controller (Enabled)
Use this item to enable or disable onchip USB3.0 controller.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Press <Esc> to return to the Advanced Menu page.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
M.I.B III
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Using BIOS
Boot
Security
Exit
[Enabled]
[Enabled]
[Enabled]
USB Support Parameters
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Advertisement
Table of Contents
