Table of Contents
Advertisement
12
Installing Memory Modules
This motherboard accommodates four memory modules. It can support four 240-pin
DDR3 1333/1066. The total memory capacity is 16 GB.
DDR3 SDRAM memory module table
You must install at least one module in any of the four slots. Total memory capacity
is 16 GB.
The four DDR3 memory sockets (DDR3_1, DDR3_2, DDR3_3 and DDR3_4) are
divided into two channels and each channel has two memory sockets as following:
Channel A: DDR3_1, DDR3_2
Channel B: DDR3_3, DDR3_4
Mode
1 DIMM
2 DIMMs
4 DIMMs
1. To achieve better airflow rates and heat dissipation, we suggest
that you use a high quality fan with 3800 rpm at least. CPU fan and
heatsink installation procedures may vary with the type of CPU fan/
heatsink supplied. The form and size of fan/heatsink may also vary.
2. DO NOT remove the CPU cap from the socket before installing a
CPU.
3. Return Material Authorization (RMA) requests will be accepted
only if the motherboard comes with the cap on the LGA1155 socket.
Memory module
DDR3
1066
DDR3
1333
Recommend memory configuration
DDR3_1
Populated
Populated
Populated
Populated
(Single Side)
(Single Side)
When insert 4 DIMM single side memory, it may run at DDR3 1066.
Installing the Motherboard
Memory Bus
533 MHz
667 MHz
Sockets
DDR3_2
DDR3_3
Populated
Populated
(Single Side)
DDR3_4
Populated
(Single Side)
Advertisement
Table of Contents
