Optical Parts Disassembly; Projection Lens Removal - Sanyo PLC-XE40 Service Manual

Optical Parts Disassembly

Before taking this procedure, remove Cabinet Top , Cabinet Front and Main Board following to the "Mechanical
Disassembly".
Disassembly requires a 2.0mm hex wrench.
z

Projection lens removal

(M3x8)x4
Projection lens
Note on replaceing the Projection Lens
- When the Projection Lens is replaced with the new
one, make sure that the fixing tape must be removed
as the figuer.
x
Integrator lens-in disassembly
(M2.5x5)x2
Fig.1
Integrator Lens-In Ass'y
Fig.2
-14-
Integrator lens-in
* Rugged surface
(Behind)
Fixing tape
Hooks