Table Of Contents; Introduction - Husqvarna TS 355 B Operator's Manual

Table of Contents

Section
Table of Contents.............................................. 2
Introduction....................................................... 2
Symbols & Decals ...................................... 3 - 7
Safety Instructions..................................... 8 - 11
What-Is-What (Part Identification)................. 12
Assembly......................................................... 13
Operation.................................................. 14 - 19
Maintenance............................................. 20 - 24
Specifications.................................................. 25
Contact Information.........................................26
EVERY MACHINE IS THOROUGHLY TESTED BEFORE LEAVING THE FACTORY. EACH MACHINE IS
SUPPLIED WITH A COPY OF THIS MANUAL. OPERATORS OF THIS EQUIPMENT MUST READ AND BE
FAMILIAR WITH THE SAFETY WARNINGS. FAILURE TO OBEY WARNINGS MAY RESULT IN INJURY OR
DEATH. FOLLOW INSTRUCTIONS STRICTLY TO ENSURE LONG SERVICE IN NORMAL OPERATION.
TABLE OF CONTENTS & INTRODUCTION
Page No.
Before starting up machine make sure you
completely read these instructions. Be familiar
with operation of the machine before operation!

Introduction

Thank you for purchasing your new machine from Husqvar -
na Construction Products. We have provided important
safety messages in this manual and on the machine.
Please read these messages carefully. A safety message
alerts you to potential hazards that could hurt you or others.
Each safety message is preceded by a symbol or the safety
alert symbol (
CAUTION .
These signal words mean:
WARNING : Indicates a hazardous situation which, if not
avoided COULD result in death or serious injury.
CAUTION : Indicates a hazardous situation, which, if not
avoided, COULD result in minor or moderate injury. It may
also be used to alert against unsafe practices.
Each message tells you what the hazard is, what can hap -
pen, and what you can do to avoid or reduce injury. Other
important messages are preceded by the word NOTICE.
NOTICE means:
NOTICE : Indicates a hazardous situation which, if not
avoided, could result in property damage. Your machine
or other property can be damaged if you don't follow this
instruction.
The safety labels should be periodically inspected and
cleaned by the user to maintain good legibility at a safe
viewing distance. If the label is worn, damaged, or is illeg -
ible, it should be replaced.
WARNING!
) and one of two words, WARNING , or
2