Table of Contents
Advertisement
Pro-Stitcher as a horizontal or vertical channel lock
If you use the channel lock feature in Pro-Stitcher, you will be able to stitch horizontal and vertical lines that
are perfectly square with Pro-Stitcher and the frame.
To stitch a horizontal or vertical line with the channel lock
• Select Horizontal Channel Lock to lock Pro-Stitcher so it stitches only in a horizontal direction.
Press the Start/Stop button on the machine's handlebars and move the machine to stitch the line in
a left-to-right or right-to-left direction.
• Select Vertical Channel Lock to lock Pro-Stitcher so it stitches only in a vertical direction. Press the
Stop/Start button the machine's handlebars and move the machine to stitch the line in a top-to-
bottom or bottom-to-top direction.
 IMPORTANT: Ensure that the carriage motor levers are in the engaged position. You can then
manually use the quilting machine handles to stitch either horizontal or vertical lines.
Ensure your quilt top is loaded squarely on the frame by stitching a horizontal plumb line
across the top of the batting and backing. Select Horizontal Channel Lock, press the Start/
Stop button on the machine's handlebars, and stitch a plumb line approximately one inch
from the top of the quilt backing and batting. Then align the top edge of the quilt top with
the plumb line and baste close to the edge so the stitching will be covered by the quilt's
binding.
Adjust settings while quilting
While the machine is stitching, you can adjust several quilting settings, such as speed, auto jump, stitches
per inch, tieoff, pullup, and pause delay. For more information about quilt settings, see chapter 8, Settings
Menu. You can also adjust the most commonly used settings directly on the Stitch screen.
7.4 | Quilt Menu
Machine Quilting Tip: To stitch a plumb line with Pro-Stitcher
Pro-Stitcher User Manual
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
