To Name A Group; To Change The Stitch Order Of Multiple Designs; To Measure Distances In A Design Or On The Quilt - Baby Lock Pro-Stitcher BLPS3 Instruction And Reference Manual

To name a group

• Select Name to enter a descriptive name for the group to replace the group number assigned by
Pro-Stitcher. Use the keyboard that appears to enter a name and then select OK to save the name
or Cancel to close the name box.
 NOTE: If the keyboard opens on top of the box for entering the name, move it by touching the top
area of the keyboard and dragging it to a new location on the screen. Close the on-screen keyboard
or name box by touching the Close (X) button in the upper-right corner. Alternately you can drag
the name box to a new area on the screen in the same way.

To change the stitch order of multiple designs

• Select Stitch Order to change the order in which the designs in the group are stitched. Choose one
or more design and then touch the up and down arrows to shift the stitch order.
Jump lines between designs change as the stitch order changes.

To measure distances in a design or on the quilt

Use the Ruler to measure distances in a design or directly on the quilt.
1. Move the machine so the crosshairs, or the needle position, are at the starting point, or zero
coordinate, of the section to be measured.
4.8 | Overview
Choose one or more
design and then
touch the up or down
arrow keys to change
the order they will be
stitched.
Pro-Stitcher User Manual