Sony Bravia KLV-46S200A Operating Instructions Manual page 8

Ventilation
Leave space around the LCD TV. Otherwise, adequate air-
circulation may be blocked causing overheating and cause
fire or damage the LCD TV.
When installing the LCD TV on the wall
30cm
10cm
10cm
Never install the LCD TV as follows:
Air circulation is blocked.
When installing the LCD TV using a stand
30cm
10cm
Never install the LCD TV as follows:
Air circulation is blocked.
8
GB
10cm
Leave this
space at
least.
Wall
10cm
Leave this space at least.
Wall
Power Sources
Overloading
This LCD TV is designed to
operate on a 110-240V AC
supply for the LCD TV. Take
care not to connect too many
appliances to the same AC
power outlet as this could
result in fire or electric shock.
AC power outlet
Do not use a poor fitting AC power plug.
Insert the plug fully into the AC power
outlet. If it is loose, it may cause arcing and
result in fire. Contact your electrician to
have the AC power plug changed.
When you disconnect the AC power cord,
disconnect it from the AC outlet first.
For the TV set with a three-wire
grounding type AC mains plug
This TV set with CLASS 1 construction must be connected
to an AC mains socket outlet with a protective earthing
connection.
Moisture
Do not touch the AC power cord with a
wet hand. If you plug/unplug the AC
power cord with a wet hand, it may cause
electric shock.
Lightning storms
For your own safety, do not
touch any part of the LCD TV,
AC power cord or antenna lead
during lightning storms.
AC power cord protection
15cm
Pull out the AC power cord by
the plug. Do not pull on the
AC power cord itself.
Wiring
Unplug the AC power cord when wiring cables. Be sure to
unplug the AC power cord for your safety, when hooking up.
Cleaning
Clean the AC power plug
regularly. If the plug is covered
with dust and it picks up moisture,
its insulation may deteriorate and
result in fire. Unplug the AC
power plug and clean it regularly.
Grounding
To avoid electric shock, be sure to connect the supplied AC
power cord to a grounded power outlet.
If the plug fails to fit, contact your electrician to have the
outlet changed.