Sony BRAVIA KLV-26S200 Quick Setup Manual

KLV-23S200A
KLV-26S200A
KLV-32S200A
KLV-40S200A

Quick Setup Guide

For further information, see the operating instruction supplied with the TV.
Please retain this guide for your future reference.
Upgrade your signal to high-definition programming to view the same picture
quality at home as you've seen in the store. Contact your cable or satellite provider
for upgrading to high-definition TV for stunning detail and richer sound.
For Your Convenience
Please contact Sony directly if you have questions on the use of your television after
reading your Quick Setup Guide and manual.
Contact Sony Customer Support at:
http://www.sony.com/tvsupport
or to speak with a support representative:
Canada
1-877-899-SONY (7669)
8:00 AM - 6:00 PM (Eastern)
8:00 AM - 5:00 PM (Western)
Please Do Not Return the Product to the Store
Sony Corporation © 2006
Printed in Mexico
A
Use this diagram if you have;
VCR
If your DVD player has an HDMI jack, use that
instead of the video connections shown here.
2-697-099-11(1)
Cables Required
Splitter
Coaxial
DVD
PC
Composite
Player
Component
Audio
HD15-HD15
Making Audio/Video Connections
Your new TV includes various types of video inputs and analog audio jacks.
Use the outputs/inputs that are available on your components that provide the best
audio/video performances:
Connector type
Analog Audio
The connection diagrams shown below and on the reverse side are recommendations only;
other possible solutions may exist. Connections that include an AV receiver can often be
complex, so check your AV receiver's instruction manual for additional details.
See the "Cables Required" chart that appears with the diagram to determine which cables you'll
need. Depending on the components you plan to connect, you may need to purchase extra cables.

Running Initial Setup

1
POWER
Press to turn on the TV.
The Initial Setup screen appears.
2
Press V/v to highlight the on-screen display
language. Then press
The message "First please connect cable/
antenna. Do you want to start Auto Program?" appears.
3
Press B/b to highlight "OK" then press
4
When Initial Setup is complete, the TV will
display the Channel Setup menu.
To run Auto Program again at a later time
Refer to the manual on "Initial Setup" and "Auto Program" sections.
B
1
Use this diagram if you have;
3
Cable Box
1
VCR
or
1
Satellite Receiver
2
1
If your DVD player or satellite receiver has an
HDMI jack, use that instead of the video
connections shown here.
Best Audio/Video
Connector type
Performance
HDMI (High-Definition
Multimedia Interface)
DVI
(Digital Visual Interface)
Will require an adapter to connect to this TV.
Component video
S VIDEO
Composite video
Initial Setup
Please select your language
.
.
Auto Program
Programmed Channel:
Cables Required
Splitter
Coaxial
Composite
DVD PC
AV Receiver
Player
Component
Audio
HD15-HD15
Optical Audio
If you are not using a cable box or
satellite receiver, connect your cable to
the VCR's RF IN jack.
7
6
RGB
R AUDIO L
AUDIO
PC IN
HD/DVD IN
VIDEO IN
(1080i/720p/480p/480i)
1 3 4 5
S VIDEO
Y
P
B
VIDEO P
R
AUDIO OUT (VAR/FIX)
L L
(MONO)
AUDIO AUDIO
R R
English
Español
Français
10
Now tuning
1
4
2
1
3
1
1
Continued ,