Superior BRT4036TMN Installation And Operation Instructions Manual page 12

Complete your gas installation by connecting incoming gas line with flexible gas line. Secure tightly with wrench but DO NOT OVERTIGHTEN.
EMBER AND PAN MATERIAL PLACEMENT
1. Open bag(s) of vermiculite and fill entire burner pan until burner tube is completely covered (see Figure 19).
2. Smooth pan material just even with edges of burner pan.
3. Remove ember material from bag and flatten small amounts into quarter size pieces and lay on top of surface of pan material (see Figure
20).
4. Place just enough to cover entire surface and leave about a 1/2" gap under lower grate members to allow air to flow (see Figure 21).
1/2" NPT
Incoming
Gas Line
Grate
Vermiculite
(Pan Material)
Figure 19 - Fill Entire Burner Pan with Vermiculite
12
INSTALLATION Continued
Flexible Gas Line
Gas Shutoff
Do NOT Kink
Valve
Note:
1) Wire Connections
Not Shown for Clarity
2) * 1/8" NPT Plugged
Tapping
Figure 18 - Connecting Flexible Gas Line to Millivolt Valve
Burner Pan
0.5"
Figure 21 - Pan and Ember Material Clearances
SuperiorFireplaces.US.com
Red Surface Indicates For
Propane/LP Use Only
ON
OFF
IN
Inlet Pressure Tap
Ember
Material
Grate
Figure 20 - Ember Material on Surface of Pan Material
Grate
Pan and Ember
Material
0.5"
Burner Pan
Pilot Adj.
OUT
Outlet
Pressure Tap
Vermiculite (Pan Material)
(Vermiculite)
Burner
Pan
126736-01C