Setup; Assembling The Handle - Toro TimeMaster 20975 Operator's Manual

Setup

Important: Remove and discard the protective plastic
sheet that covers the engine.
1

Assembling the Handle

No Parts Required
Procedure
WARNING
Assembling and unfolding the handle improperly
can damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when unfolding the
handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Rotate the upper handle so that it nests together with
the lower handle (Figure 3), and tighten both knobs on
the handle to lock the upper handle in place (Figure 4).
2
1
1. Upper handle
G016547
Figure 3
2. Knob (2)
1. Handle-lock lever
2. Release the handle-lock lever (Figure 4).
3. Pull the handle rearward and lock it into position
(Figure 4).
6
1
G016551
Figure 4