Miele CVA6805 Operating And Installation Instructions page 86

Frequently Asked Questions
Problem
The drinking vessel be‐
ing used is repeatedly
not recognized by the
automatic dispenser
adjustment.
The main dispenser
lowers until it touches
the top of the cup or
glass and cup protec‐
tion switch-off is acti‐
vated.
Cup protection switch-
off does not work. The
main dispenser lowers
until it touches the top
of the vessel and the
cleaning container or
another vessel gets
caught between the
main dispenser and the
drip tray.
86
Possible cause and solution
The cup or glass is not suited for the sensing mecha‐
nism.
 Use cups or glasses that are suitable for automat‐
ic dispenser adjustment.
There is a fault with the automatic dispenser adjust‐
ment.
 Turn the machine off with the On / Off  button.
Wait for 2 minutes before turning it back on again.
 Use another drinking vessel and prepare a drink.
 If cup protection switch-off is activated again or
the main dispenser lowers until it touches the top
of the cup or glass again, please contact Miele.
If the cleaning container is sitting too close to the
panel behind the main dispenser, or even touches it,
the rim of the container will not be properly recog‐
nized by the automatic dispenser adjustment.
 Move the cleaning container forwards a little.