Table of Contents
Advertisement
■ Optional battery case (BP-240)
When using the optional battery case attached to the trans-
ceiver, install 6 AAA (LR03) size alkaline batteries as illus-
trated to the right.
q Unhook the battery cover release hook (q), and open the
cover in the direction of the arrow (w). (Fig.1)
w Then, install 6 AAA (LR03) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
e Fit the cover in the direction of the arrow (e), then close
(r). And hook the battery cover release hook until it
makes a 'click' sound (t). (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new and
old batteries together.
• Keep battery terminals clean. It's a good idea to occa-
sionally clean them.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
• Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
NOTE: When the optional battery case is attached, the
battery type must be selected to "DRY BATT" when turning
the transceiver ON. (p. 11)
BATTERY CASE
Fig.1
w
Fig.2
Fig.3
r
5
BP-240
q
e
t
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24
Advertisement
Table of Contents
