Honeywell Q7055A Installation Instructions Manual page 35

delete
test
exit
EN1B-0198GE51 R1004B
BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
If this is denied the old settings will be
restored. Otherwise, the new settings
are stored to the Flash memory. These
settings are immediately active.
delete download configuration. After
this operation command load can't be
used anymore. New download con-
figuration definitions must be entered
using the command modify.
tests current download configuration.
This command can be used to check
whether the entered download con-
figuration is valid or not.
With the command test, optional
command-line parameters are allowed.
Accepted parameters are FTP-Server IP-
Address and/or a filename for checking
existence. Given command-line para-
meters temporarily
values in the actual download con-
figuration.
N O T E :
based FTP-Servers, it has been ob-
served that this command sometimes
fails the first time. If so, we recom-
mend retrying it. If it still fails, one of
the parameters may be wrong.
exits the sub-shell and returns to the
main shell.
supercede
With some Windows NT
the
35