Removing The Overheat Thermostat; Removing The Heating Temperature Sensor (N.t.c.); Removing The D.h.w. Temperature Sensor (N.t.c.) - Ariston microCombi Servicing Instructions

1.5.7 Removing the overheat thermostat

1. Disconnect the overheat
connections "J1" (F . 1.48);
IG
2. Then remove the thermostat from its mounting by
releasing the securing clip (F
F . 1.49
IG
1.5.8 Removing the heating temperature sensor
(N.T.C.)
1. Pull off the electrical connector and unscrew the sensor
probe using a suitable spanner (F
Supplied By www.heating spares.co Tel. 0161 620 6677
thermostat electrical
. 1.49 /1.50).
IG
J1
F . 1.48
IG
F . 1.50
IG
. 1.51).
IG
F . 1.51
IG

1.5.9 Removing the D.H.W. temperature sensor (N.T.C.)

1. Pull off the electrical connector and unscrew the sensor
probe using a suitable spanner (F . 1.52).
IG
F . 1.52
IG
15