11. Using the Wi-Fi/NFC Function
Sending images to a smartphone/tablet
Preparations
•
Install the "Image App" in advance.
1
Select the menu.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] or [Send Images Stored in the Camera] >
[Smartphone]
2
Select [Via Network] or [Direct], and connect.
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start "Image App".
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1 Start "Image App".
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit.
3 Start "Image App".
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
When [Send Images While Recording] has been selected
5
Take pictures.
When [Send Images Stored in the Camera] has been selected
5
Select the picture.
(P289)
(P63)
(P289)
(P289)
(P289)
(P308)
(P308)
(P324)
(P309)
310