13. Others
Bright spot not in subject is recorded.
•
There may be defective pixels in the image sensor.
> Perform [Pixel Refresh] (P83).
Subject cannot be locked.
(AF tracking not possible)
•
Set the AF area to the distinctive color of the subject if there is a part that is different from the
surrounding color.
(P147)
Operation sound is small.
•
Is your finger covering up the speaker?
Recording by Panorama Shot Mode is ended before finishing.
•
If the camera is moved too slowly, the camera has assumed that camera motion was stopped
and will end the still picture recording.
•
If there is a great deal of shaking towards the recording direction while moving the camera,
recording will end.
4K photo recording stops before finishing.
•
When the ambient temperature is high or recording with [
([4K Burst(S/S)]) of the 4K Photo function is performed continuously, the camera may display
[
] and stop the recording to protect itself. Wait until the camera cools down.
Motion pictures
Recording motion pictures is not possible.
•
You may not be able to record for a short while after turning this unit on when using a large
capacity card.
Motion picture recording stops in the middle.
•
When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [
] and stop the recording to protect itself. Wait until the camera cools down.
•
Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating
required for the card differs. Use a card that meets the rating. For details, refer to
picture/4K photo recording and speed class ratings
•
When a card with a slow data writing speed is used, motion picture recording may stop midway.
> If a card on which recording and deleting have been repeated many times or a card that
has been formatted on a PC or other equipment is being used, we recommend that you
make a backup of the data and format
(P17)
"
on P22.
(P33)
the card on the unit.
381
] ([4K Burst]) or [
]
"
About motion