Table of Contents
Advertisement
Troubleshooting
Problem
No hot or
cold water.
No water
running out
of spigots.
Water dis-
penser leaks
from the out-
side.
Water has
poor taste or
odor.
Possible Causes
1. Dispenser is not
plugged in.
2. The fuse is blown/circuit
breaker is tipped.
3. Cold/Hot Water switch is
not turned on.
4. Over consumption of
cold or hot water in a short
period of time.
1. Empty water bottle.
2. Inlet of water bottle sup-
porter blocked by bottle
seal.
3. Mineral deposits clog-
ging tank.
Crack or pin hole in water
bottle
Tank needs to be cleaned
or sanitized
Solution
1. Push plug completely into
outlet.
2a. Replace house fuse/reset
circuit breaker.
2b. If too many items are
plugged into a single circuit,
move some items to a differ-
ent circuit.
3. Turn on Cold/Hot water
switch (#5/#6 on the Parts
and Features list).
4. Wait 30 minutes before us-
ing again.
1. Replace with new bottle.
2. Remove water bottle and
check inlet. Clean out waste
paper and insert bottle again.
3. See Care and Cleaning.
Replace with new bottle
See "Sanitizing and Cleaning"
instructions
9
Hide quick links:
Advertisement
Table of Contents
