Epson TM-T88V-DT User Manual page 17

English
Securing the Product
Using the optional affixing tape (Model: DF-10) secures the product to the installation surface.
Follow the steps below to use the affixing tape.
1. Turn over the product so that you can see its bottom.
2. With two pieces of the affixing tape combined, peel off the backing paper of a pair on one side,
and paste it to one of the specified positions on the bottom of the product.
3. In the same way, paste other three pairs of tape in the specified positions.
4. Peel off the backing paper of each pair on the other side of the affixing tape, turn over the
product back on its bottom, and place and secure it firmly to the installation surface.
Positioning lines
17