Table of Contents
Advertisement
Audio and Video > Image
Advanced Mode
This section explains how to configure the image settings of the Network Camera. It is composed of the
following four columns: General settings, Preference, Exposure, Zoom and Focus, and Privacy mask.
General settings
Video title: Enter a name that will be displayed on the title bar of the live video as the picture shown
below.
Show timestamp and video title in video and snapshots: Enter a name that will be displayed on the title
bar of the live video as the picture shown below.
Zoom factor: If you check this item, the zoom indicator will be displayed on the live view window when
you operating digital-zoom in/out. You may zoom in/out the image by scrolling the mouse inside the live
viewing window, or click the zoom button on main page.
Position of timestamp and video title on image: Select to display time stamp and video title on the top or
at the bottom of the video stream.
Timestamp and video title font size: Select the font size for the time stamp and title.
Video Title
Video (TCP-AV)
2011/10/15 17:08:56
Title and Time
Video 17:08:56 2011/10/15
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
70
Advertisement
Table of Contents
